Post by TRow on Jul 4, 2004 0:40:16 GMT -5
This is the Improvised Slot Card fan I was trying to describe in this thread....
xpsmodz.proboards33.com/index.cgi?board=mods&action=display&thread=1088660506
I used the Slot off the "old" PCI Blower I had from a Previous Mod to Secure the 92mm R.Nidec which was also left over from Stage 2 (R.Fan Replacement) Mod.
3-Cable Ties-For Main Attachment to Slot Cover
4-Small Cable Ties-For Tension On Large Wireties
**Notice I 'strategically displaced'(BENT) the Thermistor to be closer to Heat sources**
The Smaller Wire Ties are Used for Tension to secure the Fan from Any Movement. This Mod kept the Card secure even with the Thermistor(NOT RECOMMENDED) Override and the Fan @ 100% CFM.
T.Row
xpsmodz.proboards33.com/index.cgi?board=mods&action=display&thread=1088660506
I used the Slot off the "old" PCI Blower I had from a Previous Mod to Secure the 92mm R.Nidec which was also left over from Stage 2 (R.Fan Replacement) Mod.
3-Cable Ties-For Main Attachment to Slot Cover
4-Small Cable Ties-For Tension On Large Wireties
**Notice I 'strategically displaced'(BENT) the Thermistor to be closer to Heat sources**
The Smaller Wire Ties are Used for Tension to secure the Fan from Any Movement. This Mod kept the Card secure even with the Thermistor(NOT RECOMMENDED) Override and the Fan @ 100% CFM.
T.Row
