|
Post by TRow on Jun 8, 2004 22:42:30 GMT -5
|
|
|
Post by Techknow on Jun 10, 2004 8:14:55 GMT -5
That install would even be hard for me. I hate messing with the Mobo, even at work, I use EVERY precaution necessary.
*Fried Many RAM Modules in my day
Techknow
|
|
|
Post by gdawg8947 on Jul 1, 2004 19:16:06 GMT -5
Anyone tried this mod out before? Anyone willing to part with a heat-piped heatsink? I probably have the only XPS that was shipped with a regular heatsink that's not heat-piped.
|
|
|
Post by dano104 on Jul 1, 2004 19:37:12 GMT -5
A very detailed link was provdided with every step required to replace Dell's heatsink or heatpiped heat sink. You should check it out, very well documented. www.umsl.edu/~natc7d/Deezmod.htm
|
|
|
Post by crusier on Jul 1, 2004 23:32:42 GMT -5
My 2.8 gen1 XPS came with which was replaced with The info on the invoice was 9Y212 assy, htsnk, tsmt, P4, 3.06, gx270. You can order it from DELL. Sorry I can't give you a price as mine was done at no charge while chasing cooling problems, but I would expect it to be in the $20-$30 range. It just plugged right in as a replacement for me after removing the heatsink paste taped on it and applying Artic Silver 5. I've seen some other part numbers thrown around but can't recall exactly what or where they were.
|
|
|
Post by gdawg8947 on Jul 1, 2004 23:51:46 GMT -5
I'm familiar with the link, but back to my original question. Has anyone tried performing the mod themselves?
|
|
|
Post by TRow on Jul 1, 2004 23:52:51 GMT -5
Anyone tried this mod out before? Anyone willing to part with a heat-piped heatsink? I probably have the only XPS that was shipped with a regular heatsink that's not heat-piped. Your not the only one....Ive seen this with a couple of XPS user's now.. ======================================= Questions: 1. Do you plan on adding a Heatsink Fan? 2. Whats your System Specs and Main Purpose of Usage? (Aka Gamer,Video Editing,Surfing the web) 3. What Ambient Air Temps do you typically Operate in? T.RoW
|
|
|
Post by gdawg8947 on Jul 2, 2004 3:09:23 GMT -5
Also, does anyone know the cooling gains achieved when switching to the Zalman cooler from the stock heatsink?
|
|
|
Post by gdawg8947 on Jul 2, 2004 4:46:55 GMT -5
Hey T.Row, it's me Greg. Anyway I'm thinking of performing the mod. I'm thinking of installing the Aluminum/Copper variant of the Zalman cooler. It's lighter and thus will put less of a strain on the motherboard. Plus, according to silentpcreview.com, the aluminum/copper cooler performs just as well as the all copper one. Here's the link to the review. www.silentpcreview.com/article92-page1.html
|
|
|
Post by TRow on Jul 2, 2004 14:18:38 GMT -5
Greg, long time no see, and your still dealing with that Heatsink. I haven't done this mod yet, but have a well documented page on my site that does, and lately with all the discussion...this just might be a Stage 5....(but I love my UFO#2, Great H.Sink FAN! ! !) ======================================= The MOST important part of this modification is the Socket478 Retension mechanism. Once you properly install this piece, the choice is yours. Zalman, Thermalright, Thermaltake heatsink's are proven to fit well with Dell Board's vs. there transistor patterns. Weight could be an issue if a backplate isn't used to secure heavier Heatsinks.(Tt,Thermalright) Don't Scimp on the Artic Silver 5! If you install one(hsink)take some pics, post em up. Good luck, T.RoW
|
|
|
Post by TRow on Jul 2, 2004 14:22:34 GMT -5
Since Overclocking is out of the question(for now), Any Reputable Heatsink would be more than able to handle Socket478 CPU Heat with ease... The Choice you made would be perfect, Zalman are cool, but Tt are cooler. T.RoW
|
|
|
Post by gdawg8947 on Jul 2, 2004 20:06:52 GMT -5
Haha. Yes, still dealing with my heatsink. Will post pictures once it's done. Hopefully, it'll go smoothly.
|
|
|
Post by gdawg8947 on Jul 2, 2004 20:10:28 GMT -5
Hey T.Row, what Thermaltake heatsinks do you recommend? I need a good balance of performance and quietness.
|
|
|
Post by TRow on Jul 2, 2004 21:05:58 GMT -5
Hey T.Row, what Thermaltake heatsinks do you recommend? I need a good balance of performance and quietness. Zalman CNPS7000A will be the perfect match. Either ALCU or CU flavors should both be fine. But Cu:Copper will yield better results,and weigh in heavier. =T.RoW=
|
|
|
Post by TRow on Jul 4, 2004 1:16:26 GMT -5
|
|
buzsaw
Freshmen
Pledge
Posts: 35
|
Post by buzsaw on Jul 7, 2004 23:33:31 GMT -5
Also, does anyone know the cooling gains achieved when switching to the Zalman cooler from the stock heatsink? I did the 7000 Alcu cooler mod today, my temps didn't drop as much as I thought they would. Possibly because I haven't done the rear fan mod yet so the hot air is not escapnig fast enough. That retension mechanism bracket was not easy to get a hold of either, I live in Ontario so for me to get it from intel was going to cost me $8 for the part and $20 for shipping and at a 35% exchange rate not to mention customs charges! It's amazing I didn't die choking. ha ha After driving to all the computer stores in the area I found a nice guy who gave me one free of charge! I have an update, the idiot(me) who installed the front fan put it in backwards! the temps are much better now. Also had to add extra wire to the old intake fan so that it would reach the plug from the hard drive cage, again all's well!! whew. idle temps (again) Case 30 deg C CPU 33 deg C Harddrive old temp 37 deg C new temp 32 deg C
|
|
|
Post by gdawg8947 on Jul 8, 2004 16:40:20 GMT -5
Good work. I've ordered the parts and hopefully I'll get them by the end of the week. It helps to do the rear fan mod so that you can get a nice flow of air through your case. Do you mind posting some pictures? Did you have any trouble or did it go smoothly? Any words of advice?
|
|
buzsaw
Freshmen
Pledge
Posts: 35
|
Post by buzsaw on Jul 8, 2004 22:56:24 GMT -5
Hey gdawg, Yes it went well, the only thing I would have to say was the hardest to do was attach the intel retension mech. You really have to pull hard to get the old one out once the pins are removed. Probably just as much is required to put the new one in just make sure you apply direct pressure on the pins to make sure they are seated. Maybe a good idea to seat them before you attach it so you know how far to push. I was not sure how much thermal paste to apply cause it's my first time but my temps are good so I guess I put enough. Put some on the CPU and the new heatsink. You don't want it to squeeze out once you tighten it down. Get the good stuff, arctic silver 5. GOOD LUCK!#nosmileys#nosmileys
|
|
|
Post by gdawg8947 on Jul 11, 2004 16:42:53 GMT -5
I've ordered my parts and I'm still waiting. I have everything I need including the Arctic Silver, so it's just a matter of time. What temperatures have you been getting with the Zalman? Are you running on normal or silent mode? Is the noise of the fan noticeable between the two modes?
|
|
buzsaw
Freshmen
Pledge
Posts: 35
|
Post by buzsaw on Jul 11, 2004 21:46:52 GMT -5
Temps are not that bad considering I'm still running stock rear fans. Mbm says the low is 34 high is 38 while surfing. I'ts recommended that 3.06 or higher(I think) should run on normal, so I won't be testing that, I'll leave that for a braver xps soul.......... perhaps you? What are you running anyway? As promised here's the pics, blurry but still visible. Zalman Alcu cooler and the whole package I mounted the Xps in a cpu Caddy so its off the floor and not sucking in all that floor dust. It swivels and will move in and out mounts easy. From Lee Valley www.leevalley.com/hardware/page.asp?SID=&ccurrency=2&page=32489&category=3Also, I wrapped all the wires in the back in black cabling so its not too visible from the front.#nosmileys#nosmileys
|
|